Differences

This shows you the differences between two versions of the page.

--- ftditest [2010/08/06 17:15]
ladyada
+++ ftditest [2016/01/28 18:05] (current)
@@ Line 33: / Line 33: @@
 If test voltages are not 5V and 3.3V, the cable is bad
-====== Communication test ======
+====== Install software ======
 Download X-CTU: http://ftp1.digi.com/support/utilities/40002637_c.exe
@@ Line 49: / Line 49: @@
 Click on **TERMINAL** tab
-====== Test RX and TX ======
+====== STEP 3: Test RX and TX ======
 ===== Test TX is not shorted to RX =====
@@ Line 75: / Line 75: @@
 If red text does not appear, cable is bad
-====== Test CTS ======
+====== STEP 4: Test CTS ======
 We will test the CTS pin. Connect 100 ohm resistor between brown and red wires
@@ Line 93: / Line 93: @@
 {{:ftdi:xctuctslow.gif|}}
-====== Test RTS ======
+====== STEP 5: Test RTS ======
 ===== RTS short test =====
@@ Line 106: / Line 106: @@
 ===== RTS function test =====
-Put 100 ohm resistor between Yellow and Brown wires
+Put 100 ohm resistor between Green and Brown wires
 {{:ftdi:ctsrts.jpg?500|}}
@@ Line 119: / Line 119: @@
 If CTS box does not change color from black to green , cable is bad
+===== Quit software =====
+After each cable, quit software then unplug cable

AdaWiki