Differences

This shows you the differences between two versions of the page.

--- laserinfo:supplies [2008/02/27 17:53]
ahaley
+++ laserinfo:supplies [2008/02/27 17:53]
ahaley
@@ Line 2: / Line 2: @@
 These are optional supplies, often "consumables"
@@ Line 16: / Line 17: @@
 After the etch you just rub it off with a damp paper towel.
-I've used the Cermark tape for people that are nervous about having their equipment sprayed and it works quite well. I've also purchased the paint on and it's much more economical and easy to apply. I've been using the LMM6000 purchased directly from Thermark. Buying at least the 250 from Thermark directly is about the same price but the 500 is cheaper from Laserbits. As with a lot of things, the more you buy the better price you get.
+I've used the Cermark tape for people that are nervous about having their equipment sprayed and it works quite well. I've also purchased the paint on and it's much more economical and easy to apply. I've been using the LMM6000 purchased directly from Thermark. Buying at least the 250 from Thermark directly is about the same price but the 500 is cheaper from Laserbits. As with a lot of things, the more you buy the better price you get. [Aaron Haley]
 ===== Novus Acrylic Polish =====

AdaWiki