AdaWiki

==== Introduction  ====


Here is a 'generic' step-by-step to getting an AVR development platform going on your computer using the free AVR toolchain (avr-gcc, avr-libc and avrdude) Pretty much every project uses this toolset so its a good way to get going 



Comments? Suggestions? Post to the [[http://www.ladyada.net/forums/|forum]]!


==== Windows Setup  ====
////

[[http://sourceforge.net/projects/winavr/|Download the WinAVR package from sourceforge]] Make sure to download the latest and greatest version

if you grab some older versions (say June 07), avrdude may complain about not being able to find **libusb0.dll**, do a search on your computer for the file, then copy it to **C:/Windows/System32** and try again! This is a known bug, hopefully to be fixed soon...

{{  http://www.ladyada.net/images/minipov3/winavrsave.jpg?nolink  |}} \\ {{ http://www.ladyada.net/images/minipov3/winavrdl.jpg?nolink |}} 

Install the software

{{  http://www.ladyada.net/images/minipov3/winavrinstall.jpg?nolink  |}} \\  \\ {{ http://www.ladyada.net/images/minipov3/winavrinstalled.jpg?nolink |}} 

That's it! WinAVR is very simple to install, now lets test it out to make sure we have it installed. 

Open a command window

{{  http://www.ladyada.net/images/minipov3/run.jpg?nolink  |}}

{{  http://www.ladyada.net/images/minipov3/cmd.jpg?nolink  |}} 

 Now in the new terminal window type in **avrdude** you should get this response, which is basically a simple list of what **avrdude **can do 

{{ http://www.ladyada.net/images/avrtutorial/avrtest.jpg?nolink&669x482 |}}
AdaWiki

User Tools

Site Tools

Page Tools
