skip to content

AdaWiki

User Tools

Log In

Site Tools

Recent Changes
Media Manager
Sitemap

You are here: start » x0x » envelopetesting

Trace:

x0x:envelopetesting

===== Testing the Envelope =====
  - Power up the main board by connecting J4
  - Clip one end of an aligator clip to the south side of R146 (this provides the gate signal), and the other end to the exposed side of R3 on the IO board.
  - Check the voltage on the north side of D35.  It should be 12V when the clip is connected, and 0V when it isn't.

{{template>.templates:fabmenu}}

/home/ladyada/public_html/wiki/data/pages/x0x/envelopetesting.txt · Last modified: 2016/01/28 18:05 (external edit)

Page Tools

Show page
Old revisions
Backlinks
Back to top

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

CC Attribution-Share Alike 4.0 International