wavebubble:errata
Differences
This shows you the differences between two versions of the page.
|
wavebubble:errata [2007/11/23 12:28] bushing |
wavebubble:errata [2016/01/28 18:05] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | Unfortunately, there are many errors or discrepancies between the various resources available for this project. Eventually, they will all be listed here; if you can then update one of the resources (schematic, PCB layout, assembly directions), please do so and then remove the error from this list. | ||
| - | |||
| - | Forum threads: (extract info from thread, place on this page and remove thread from list:) | ||
| - | |||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=4255 | ||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=4143 | ||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=4123 | ||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=4125 | ||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=4029 | ||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=4006 | ||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=3677 | ||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=3409 | ||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=3225 | ||
| - | * http://www.ladyada.net/forums/viewtopic.php?t=3179 | ||
| - | |||
| - | ^ Part ^ Incorrect ^ Correct ^ Remarks ^ | ||
| - | | C20 | 160pF, do not place | 390-550pF, placement recommended. | | ||
| - | | C40 | 68pF | ? | Sirenza datasheets say 1-2pF, not clear if this is an error or not | | ||
| - | | C50 | ? | 1 uF 1206 | | ||
| - | | C51 | ? | .1 uF 1206 | | ||
| - | | C52 | ? | 1 uF 1206 | | ||
| - | | C53 | ? | .1 uF 1206 | | ||
| - | | C63 | ? | 1pF 0603 | | ||
| - | | C77 | ? | 4.7uF or 1uF, 0603 | Filter cap; 4.7uF part is difficult to get in 0603, 1uF is ok | | ||
| - | | C80 | 20pF | 22pF | Substitute to save money by combining order with other 22pF caps | | ||
| - | | C81 | 20pF | 22pF | Substitute to save money by combining order with other 22pF caps | | ||
| - | | C83 | ? | .1uF ? | not listed in instructions | | ||
| - | | C84 | ? | .1uF ? | not listed in instructions | | ||
| - | | L5 | ? | 1K resistor | | ||
| - | | L6 | ? | 1K resistor | | ||
| - | | R3 | ? | 47K | | ||
| - | | R4 | ? | 12K | | ||
| - | | R8 | ? | do not place | not usually necessary | | ||
| - | | R9 | ? | do not place | not usually necessary | | ||
| - | | R12 | ? | 100 ohms | not a critical value (instructions say 68 ohms) | | ||
| - | | R13 | 100K | 63K | Value may vary to adjust VCO DC Offset gain | | ||
| - | | R15 | 100K | 33K | Value may vary to adjust VCO DC Offset gain | | ||
| - | |||
| - | | R27 | 0 ohms | ferrite bead | | ||
| - | | R28 | 0 ohms | ferrite bead | | ||
| - | |||
/home/ladyada/public_html/wiki/data/pages/wavebubble/errata.txt · Last modified: 2016/01/28 18:05 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
