Parts
Check to make sure your kit comes with the following parts.Sometimes we make mistakes so double check everything and email support@adafruit.com if you need replacements!
| Image | Name |
Description | More info | Qty |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
IC1 |
Microcontroller (preprogrammed with Arduino bootloader when purchased in a kit) | ATmega328P-20PU (unprogrammed) Adafruit (Programmed) |
1 |
|||||||
 |
IC1' |
28-pin socket | 1 |
||||||||
 |
X1 |
16.00 MHz ceramic oscillator | 16 mhz ceramic resonator | 1 |
|||||||
 |
2.1mm Power Jack | 1 | |||||||||
 |
D1 |
1N4001 diode | Generic 1N4001 | 1 | |||||||
 |
IC2 | 5V regulator 7805 TO-220 package |
1 | ||||||||
 |
C1 C2 C5 C6 (opt) |
Bypass capacitor 0.1uF ceramic |
Ceramic Capacitor | 3 or 4 |
|||||||
 |
C3 |
Electrolytic capacitor 47uF / 25V |
Electrolytic Capacitor | 1 | |||||||
 |
C4 |
100uF/6.3V capacitor (the image shows a 10V but 6.3V is fine) |
Electrolytic Capacitor | 1 |
|||||||
|
R1 |
10K ohm 1/4W 5% resistor (brown black orange gold) | Generic Resistor | 1 |
|||||||
|
R2 R3 |
1.0K 1/4W 5% resistor (brown black red gold) | Generic Resistor | 2 |
|||||||
 |
D3 |
3mm red LED | 3mm red diffused | 1 | |||||||
 |
D2 |
3mm green LED | 3mm green diffused | 1 |
|||||||
 |
SW1 |
6mm tact switch button |
6mm tact switch | 1 |
|||||||
 |
ICSP |
6 pin header, 0.1"x0.1" spacing | 2x3 pin header | 1 |
|||||||
 |
40 pin male header, 0.1" spacing | 0.1" male header strip | 1 |
||||||||
 |
Jumper | 1 |
|||||||||
 |
PCB |
Circuit board | Adafruit Industries | 1 |
