Parts List
Check to make sure your kit comes with the following parts.Sometimes we make mistakes so double check everything and email support@adafruit.com if you need replacements!
Picture |
Name |
Description |
Distributor | Quantity |
|||||||
IC1 |
Microcontroller (pre-programmed when purchased in a kit) ATtiny2313V-10PU Note: this is shipped in the battery holder |
1 |
|||||||||
IC1* |
20 Pin Socket Note: this is shipped in the battery holder |
Mouser Digikey |
1 |
||||||||
|
R10-R12 |
1/4W 5% 4.7K resistor (yellow purple red) | Generic | 3 |
|||||||
|
R1-9 |
1/4W 5% 100 ohm (brown black brown) or 47 ohm (yellow purple black) resistors | Generic | 8 |
|||||||
![]() |
D1-D3 |
5.1V or 5.6V Zener diode 1N5232B |
Mouser Digikey |
3 |
|||||||
U1
|
2 AA Battery Case with switch | Mouser Digikey |
1 |
||||||||
D1-8 |
Red LED | Generic | 8 |
||||||||
X1 |
DB-9 female connector w/solder cup Norcomp 171-009-203L001 |
Mouser Digikey |
1 |
||||||||
PCB |
Silkscreened PCB | Adafruit | 1 |









