Schematic
Parts list
| Image | Name |
Description | Distributor | Qty |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
Printed circuit board | Adafruit | 1 |
||||||||
 |
LED1 | Red LED Lite-On LTL-1CHE (or any 3mm LED) |
Digikey | 1 |
|||||||
 |
LED2 | Green LED |
Digikey | 1 |
|||||||
|
R1 R2 | 470-1.0K Resistors for LED | 2 |
||||||||
 |
RESET S1 | 6mm tact switch Omron B3F-1000 (or any 6mm button) |
Digikey | 2 |
|||||||
 |
C1 C2 | 0.1uF ceramic capacitor | Digikey | 2 |
|||||||
 |
ICSP | 6 pin male header (2x3) | Digikey | 1 |
|||||||
 |
8 pin female header (1x8) | Digikey | 2 |
||||||||
 |
6 pin female header (1x6) | Digikey | 2 |
||||||||
 |
5 pin female header (1x5) | Digikey | 3 |
||||||||
 |
3 pin female header (1x3) | Digikey | 1 |
||||||||
 |
36 pin male header (1x36) | Digikey | 1 |
Optional parts
| Image | Description | Distributor |
|---|---|---|
 |
Small breadboard (300 tie points) This is a little more practical than the larger 'standard' ones |
Adafruit |
 |
Tiny breadboard (170 tie points) Also, 5 pin female header (1x5) for use with 'tiny' breadboard as 'end rails' These are pricey but you can 'make it yourself' by cutting a larger breadboard down with a hacksaw! |
|
 |
"Wire wrap" female header allows 'stacking' of shields. Buy 2 16-position and cut to save costs. |
Digikey |