User Tools

Site Tools


x0x:vcftesting

This is an old revision of the document!


Testing and Calibrating the VCF

Testing

  1. Re-attach the power supply (with J4)
  2. Apply 3volts to R90 (either with 2 AA batteries or a benchtop supply)
  3. Probe the resonance pot with either a cheap pair of headphones or your oscilloscope. With the cutoff all the way anti-clockwise, you should see mostly a sinewave. If you're probing with headphones, you should hear a low, soft tone. When you turn the cutoff up, you should see a waveform similar to the one you have selected on the VCO. Using headphones you should hear a lot of higher overtones to the sound, and it might be buzzier and more 'acidic'.

Calibrating

/home/ladyada/public_html/wiki/data/attic/x0x/vcftesting.1206790137.txt.gz · Last modified: 2016/01/28 18:05 (external edit)