Schematic
Parts
Check to make sure your kit comes with the following parts.Sometimes we make mistakes so double check everything and email support@adafruit.com if you need replacements!
| Image | Name |
Description | Distributor | Qty |
Price each | Total | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
IC1 |
Microcontroller (preprogrammed when purchased in a kit) | ATTINY2313-20PU Digikey & Mouser |
1 |
$2.36 | $2.36 | |||||||
 |
XTL1 |
12.00 MHz ceramic oscillator |
|
1 | $0.54 | $0.54 | |||||||
 |
C1 |
Bypass 104 capacitor (0.1uF) Might be blue |
BC1160CT-ND |
1 |
$0.07 | $0.07 | |||||||
|
R10 |
10K 1/4W 5% resistor (brown, black orange gold) | 10KQBK-ND | 1 | $0.05 | $0.05 | |||||||
|
R3, R4, R5, R6, R7 |
1.5K 1/4W 5% resistor (brown green red gold) | 1.5KQBK-ND | 5 | $0.05 | $0.25 | |||||||
|
R1, R2 |
27-68 ohm 1/4W 5% resistor | 47QBK-ND | 2 | $0.05 | $0.10 | |||||||
 |
LED1 |
Red 3mm LED | LTL-1CHE | 1 | $0.09 | $0.09 | |||||||
 |
LED2 |
Green 3mm LED | LTL-1CHG | 1 | $0.09 | $0.09 | |||||||
 |
D1, D2 |
3.3V Zener diode | 1N5226B | 2 |
$0.08 | $0.16 | |||||||
 |
X1 |
USB type B male jack | 61729-0010BLF | 1 |
$1.04 | $1.04 | |||||||
 |
JP2 |
10 pin box header | 1 |
$0.42 | $0.42 | ||||||||
 |
JP1 |
6 pin straight header | Molex 10-89-7062 | 1 |
$0.36 | $0.36 | |||||||
 |
JP3 |
2 pin right angle header | Mouser (640453-2) | 1 |
$0.23 | $0.23 | |||||||
 |
JP3' |
Jumper/Shunt | Mouser (71363-102LF) | 1 |
$0.10 | $0.10 | |||||||
 |
10 pin IDC cable | 1 |
$1.45 | $1.45 | |||||||||
 |
6" wire ribbon cable (6 conductors) | Digikey | 1 |
$0.90 | $0.90 | ||||||||
 |
6-pin IDC plug | FCI 71600-006LF |
2 |
$0.53 | $1.06 | ||||||||
 |
PCB |
Circuit board | Adafruit Industries | 1 |
$5.00 | $5.00 | |||||||
 |
Case |
Enclosure | Pactec CNS-0407 |
1 | $1.66 | $1.66 | |||||||
| Total | $16 |
