- Type: Log. resistive (for example, PDV-P5001 100ohm to 300K, match with 10Kohm resistor. Lower for brighter light, higher for dimmer light, experiment to get the best range!)
- Range: Visible light up to 10Lux
- Approx Cost: $2
- Distributors: Digikey Jameco Futurelec (and just about every other electronics supply store)
Use this with the resistive sensor board.
- Type: Analog voltage out
- Range: From 32 °F to 212 °F (10mV/°F)
- Approx Cost: $2.50
- Distributor: Digikey Jameco Parallax
Use this with the Analog/Digital Input & Output board, connected to an analog input configured as Analog Input.
If you set the calibration to min:0 and max: 261 the MIDI output data will be in degrees F
- Distributor: Futurlec